     |
The Shock flat wire high torque modified electric rc motors by Epic Motorsports™.These motors are designed for use on short tight tracks that require fast spool up.
Then Epic Motorsports™ Shock flat wire high torque electric rc motors could be the motor you are looking for. Epic Motorsports™ has designed an endbell with a giant billet heatsink for the Shock that includes integrated brush holders to dissipate heat. The billet heatsink brush holders make for a precise fit between brush and brush holder. Tm maximize heat transfer billet brush hoods are used. The motor can on the Shock flat wire has improved venting to optimize air flow for better cooling. Epic Motorsports&trade has installed an insulated bearing in the endbell to extend bearing life. The armatures used in all Shock flat wire motors have been balanced using a computerized digital balancer for maximum torque and rpm. All of Epic Motorsports™ Shock flat wire electric rc motors are fully rebuildable plus, timing is fully adjustable. For easy tuning Epic Motorsports™ has installed standard brush springs. 
The dimensions of Epic Motorsports Shock flat wire motors are:Can diameter - 1.42" (36.10mm)
Dyno readings for many of Epic Motorsports™ Shock flat wire motors are: 6 - Turn - Single Wind RPM: 35,857 @ 5 V Power: 153W @ 22.9K Efficiency: 44.2% @ 27.9KTorque: 85.5 Nmm 7 - Turn - Single Wind RPM: 35,857 @ 5V Power: 153W @ 22.9K Efficiency: 44.2% @ 27.9K Torque: 85.5 Nmm 7 - Turn - Double wind RPM: 35,958 @ 5V Power: 161W @ 24.2K Efficiency: 40.9% @ 29.3K Torque: 83.8 Nmm 8 - Turn - Single Wind RPM: 32,583 @ 5V Power: 137W @ 19.4K Efficiency: 47.5% @ 24.7K Torque: 98.7 Nmm 8 - Turn - Double Winds RPM: 34,670 @ 5V Power: 152W @ 20.1K Efficiency: 45.6% @ 26.7K Torque: 101.5 Nmm 9 - Turn - Single wind - dyno specs unavailable at this time 9 - Turn - Double winds RPM: 33,025 @ 5V Power: 135W @ 21.0K Efficiency: 45.7% @ 27.7K Torque: 85Nmm 10 - Turn - Single wind RPM: 29,274 @ 5.0V Power: 124W @ 17.6K Efficiency: 49.8% @ 25.0K Torque: 105.4 Nmm 10 - Turn - Double wind - dyno specs unavailable at this time 11 - Turn - Single wind - dyno specs unavailable at this time 11 - Turn - Double wind - dyno specs unavailable at this time 12 - Turn - Single wind RPM: 26,132 @ 5.0V Power: 110W @ 14.0K Efficiency: 51.7% @ 21.0K Torque: 124.4 Nmm 13 - Turn - Single wind RPM: 24,901 @ 5.0V Power: 108W @ 12.7K Efficiency: 53.9% @ 19.6K Torque: 132.8 Nmm 14 - Turn - Single wind RPM: 23,214 @ 5.0V Power: 95W @ 12.2K Efficiency: 52.4% @ 18.5K Torque: 124.5 Nmm These specs may vary from motor to motor. The Dyno specs are supplied by Epic Motorsports™. Note: Nmm is Newton millimeters, 10Nmm = 1 Kgf - Kilogram-force
Epic Motorsports™ Shock flat wire modified electric rc motors can give you the perfromance edge you are looking for. They will get you off the corners quickly with their fast spool up.
check out the Rc Truck n Car Tuning swicki at eurekster.com
|
