     |
The Havoc by Schumacher Racing™ is a stunt rc monster truck that is capable of big jumps, back flips, front flips and at home running at skateboard parks.
This is a 1/8th scale 2wd nitro powered rc monster stunt truck that is designed for the roughest and toughest off-road terrain. In designing and building this rc stunt truck Schumacher Racing™ over built all major components of the Havoc. Using huge gears, a super strong driveline and a very beefy suspension this rc monster truck is built to take just about any abuse you can throw at it. The Havoc is at home on any type of surface, be it grass, asphalt, concrete or the roughest off-road terrain you can find. To handle all the big jumps and rough terrain the Havoc features 2.75 inches (70mm) of suspension travel. To add to its toughness Schumacher Racing™ has used a 4.5mm super thick aluminum chassis with all the screw and bolt heads countersunk to keep the underside smooth. In addition the chassis has a built in front kick-up to help the Havoc stay under control on landings after the big jump or stunt. Plus, this kick-up gives it the ability to run through the roughest terrain. To add to its toughness all the suspension arms are constructed from super strong and extra thick composite material. In building the Havoc Schumacher Racing™ has used bigger and stronger components. To hold the extra thick suspension arms in place 4mm stainless steel inner hinge pins have been used and the outer c-hub suspension pins are stainless steel 3mm in diameter. Too add even more strength 3.5mm stainless steel turnbuckles with heavy duty rod ends are used to adjust camber and steering links.
To add more strength to the Havoc Schumacher Racing™ has used carbon fiber shock towers. Now do not be misconceived carbon fiber does provide a much stronger and durable part than either aluminum or steel, it just depends on the grade of carbon fiber used. The carbon fiber used on the Havoc is some of the strongest grade ever used on a RC vehicle. Besides the use of super strong carbon fiber it is the design of the shock towers that is unique to the Havoc. The rear shock tower is just as big and strong as the front, the only difference is that Schumacher Racing™ needed to alter the design a little to get around the transmission. The three sections of carbon fiber that make up the rear shock tower add up to 11mm and add a 4mm brace makes for one super strong and super tough shock tower that is going to withstand almost any abuse you can give it. Another unique feature of the Havoc is how the shock tower is braced, almost all other rc monster trucks brace the shock tower to the chassis, but Schumacher Racing™ has used a unique approach to brace the rear shock and keep it from folding inward on landings after the big jump or stunt. The rear shock tower is mounted and braced to the rear bulkhead that is then braced to the engine. The brace from the transmission bulkhead simply butts up to the engine resulting in a solid reinforcement point. What you get is one of the toughest rc monster trucks on the market. Because of its design the Havoc is more at home bashing around the construction site or skate board park or BMX park than on the race track, but it is still a ton of fun. Schumacher Racing™ engineers goal was to build a stunt rc monster truck and that they have succeeded in doing. This Rc Monster Stunt Truck is as much at home flying through the air as it is plowing through the rough stuff. If you are looking for a rc monster stunt truck that is capable of doing front and back flips while at the same time conquering the toughest off-road terrain you can throw at it then the Havoc is for you.
check out the Rc Truck n Car Tuning swicki at eurekster.com Return to Rc Truck n Car Tuning Home Page
|
|||||||
