The F19 is the next generation of hand wound spec modified electric rc motor from Epic Motorsports™

From the people who invented the 19 turn electric rc motor comes Epic Motorsports™ F19.

Mike Boyland of Snowbirds fame helped to develop this next generation of hand wound 19 turn spec motor.

The F-19 hand wound spec motor meets all the standards set by ROAR and ARCOR rules.

The F19 is built using Epic Motorsports™ new teardown specs.

Epic Motorsports™ has diamond trued the commutator and used a hand wound armature.

For the highest rpms possible Epic Motorsports™ uses the thinnest webbed armature allowed by the rules.

The F19 uses the new Cobalt can and endbell with FB-9 wet magnets.

Epic Motorsports™ has used their hi-performance 4383 pure silver brushes in building the F19.

The F19 features dual ball bearings.

All F-19 hand wound spec modified motors have fully adjustable timing.

Epic Motorsports™ have factory installed the capacitors.

Plus, Epic Motorsports™ has dyno tuned and tweaked each and every F19 before it leaves the factory.

Can Diameter: 1.4" (36mm)
Length including shaft: 2.6" (67mm)
Length excluding shaft: 2.1" (53mm)
Shaft Diameter: 1/8" (3mm)

Dyno readings for Epic Motorspotrs™ F-19 are:

RPMs: 20,698 @ 5.0V
Power: 94 watts @ 11.5K
Efficiency: 59.9% @ 14.6K
Torque: 130.4 Nmm

These specs may vary from motor to motor.
The Dyno specs and dimensions for the F-19 are supplied by Epic Motorsports™.
Note: Nmm is Newton millimeters, 10Nmm = 1 Kgf - Kilogram-force

Epic Motorsports™ F-19 hand wound 19 turn spec modified motor is available for $64.99 USD here!

	Enter your search termsSubmit search form
	Web www.Rc-TrucknCar-Tuning.com